Showing posts with label Vajello paints. Show all posts
Showing posts with label Vajello paints. Show all posts

February 7, 2011

Weathering and airbrushing - part four tutorial

So it seems that I am destined to have to continue my efforts at discovering how to properly weather a 'jack. I took out my crusader this weekend to give it a go. The procedure was the same as last time though I kept the weathering as a more minimal element of the model. I feel that this time I was more succesful but I still haven't managed to get it correct. The first problem I think is the fact that I am only weathering with one type of rust. Their should be a lighter colour included here, something like Vajello Dark Red Ochre or Burnt Sienna. Then I should probably branch into some other advanced techniques. One thing I find very difficult is getting the pigment to stay in place and to be honest even getting it in place! As it is a light powder it blows all over the place. On every tutorial I have seen this is never presented as a problem. However for me it is as annoying as hell. Not only does it not stay in place but it falls onto other parts of the model wher I don't want it to be! I am hoping that there is a trick to this that I will discover somewhere.

PhotobucketPhotobucketPhotobucket Here are the shots of the completed Crusader. He came out much better than the Vanquisher simply by not having covered him in pigment. The shoulder pads I thought wouldn't see much wear and so I didn't chip them heavily. The armour on the hands and arms of the Jack got some more chips though. These worked out pretty well. I had given the model a much more heavy coat of hairspray than before and this helped with the weathering a lot. I did manage while cleaning my brush to splash a small amount of water over one of the backs of the shoulder blades. This caused the hairspray to bubble under the white. However I left it and eventually after some drying it shrank back into position. I also weathered the engine parts more heavily than before on the Crusader. I think this came out well but could really do with a lighter rust colour on the most heavily weathered areas.

PhotobucketPhotobucketPhotobucketThese are the WIP shots. The hairspray as you can see it really shiny. It was dry in this photo. However once you come to chipping it you actually lift it off so there is no shine showing. The final shot shows the chipping having been completed but without weathering pigments added. All that is left for me to do with these two 'jacks is apply varnish to fix the pigment in place, add some highlights to the red on the shoulder pads and then to do the bases.

I am wondering if it is possible to use the varnish I bought from Vajello in an airbrush. It seems from a few disscussion fora that I can. I am pretty reticent about doing this for the moment as when I tested the varnish on an Ork it isn't quite as matte as I would like and even tends to obscure a lot of highlights. This will be the next test for my airbrush!

Part One
Part Two
Part Three

January 30, 2011

Weathering and airbrushing - a beginners tutorial

So I finally got my airbrush out to try. I have been wanting to weather some vehicles for a long time and I felt now is a good time to start as I am almost solely collecting 'jacks. I have a lot of Menoth 'jacks already but they are back in Ireland. So that means a flight home or buying some more. I rally wanted to try out the hairspray technique and with that in mind I got started. Firstly the airbrush is a GW one. Nothing expensive or fancy. Very much an entry level tool but good to test the basics. I fixed it up and filled the bottle with paint. Here is where I learned the first lesson. If you squeeze a vajello paint bottle and the nozzle is a little but not completely blocked it will shoot off like a bullet. Thankfully I had the paint bottle pointed at the airbrush bottle and as such the mess was contained. Ifished the nozzle out of the bottle eventually. I then added some water not much and proceeded to spray! The result is what you see above. Not great eh? However with another pass of the brush I managed an even coat and it worked out fine.

Photobucket Here is what I used, the glass bottle hangs under the airbrush probably not the best place for it. I can't see how a gravity fed design wouldn't have been a better idea from GW. The only thing to note is that the bottle lid came lose and almost caused a catastrophe. Luckily I noticed in time and tightened it. I don't know if this was my fault or a problem with the bottle. Just be careful whe doing this yourself. A spilled bottle of paint will ruin your day!Photobucket This is the muddy mixture I sprayed on. I didn't pick a perfect colour. I used Dark Flesh which was too similar to the scab red I use on my newer 'jacks. As I shot the paint into this I ended up mixing far more than I needed! This wasn't too much of a problem as I could always pour it back into the bottle. I guess after a few uses the paint in the bottle becomes overly dilluted. I have looked at the Vajello air paints but I am not sure how much more superior they are so for now I will stick with the standard colours. They have a good description of the product on their site but I would prefer a more independent description and review. So far I haven't turned up much online.PhotobucketThis is the set up for the airbrush. Pretty simple! I have been wondering if the propellant could be a generic brand rather than GW only. I assume they have somehow made sure that the connecting pipe will only fit their cans. They wouldn't have missed something like that! The brief look I had in the nearby hobby shop proved this with the propellant having to large of a connector to fit the GW airbrush. I will search further afield though before I give up hope.

PhotobucketThis is the spray box I made up. Thankfully the fumes from the propellant are not very strong at all. This means I don't need to hang out the window to spray. Instead I can do it in comfort at my desk. The box was good enough to catch all the spray and it overhangs in such a way that it should catch a lot of the rising paint. I am not sure if this really presents a problem but it may.

PhotobucketEventually this is what I ended up with. A nice even coat of Dark Flesh. This was perfect and I am really happy with the airbrush. It won't be able to do very advanced techniques I would have to invest more for that. However for doing this type of work it is fine. The one thing to note is that the paint stays fluid much much longer than normal. I had to use a hair dryer between coats to really dry it within an acceptable time frame. The next step is the hairspray. If you haven't heard of this technique before it is used by WWII tank modellers. It is used to chip paint and gives a very realistic effect. I liberally sprayed the hairspray over the model. I probably shouldn't have used diamond effect! PhotobucketIt thankfully does not cover in thick coats. It was a nice fine even coat that didn't clog any detail. It was hellishly shiny. The third step of this technique is putting on the base coat. The base coat is the colour you want to see at the end. I sprayed white over the hairspray and made sure I got a good coverage again. I watered the paint down more than I had the Dark Flesh and this meant I got better coverage. It was similar to milk in consistency and I thought that it was probably too thin. I was quickly provde wrong. The hair dryer was still essential but a few seconds of that and the paint was dry enough to touch.Photobucket I needed to make sure and get under the model and cover everything 100%. This is the base to work all the other techniques on and it has to be good. Thankfully the airbrush made this pretty easy. I wasn't sure how long I needed to let this dry for but I thought I had read somewhere that it needed twenty four hours. So I left it over night. Once I get the next few stages done I will be posting them up here so stay tuned to see how the chipping and weathering turn out. I am hopeful that this Vanquisher turns out to be the best 'jack I have so far manage. These techniques should also be applicable to 40k vehicles and some Warhammer Fantasy stuff especially painted armour plates. Black Orcs come straight to mind.

Here is a great blog that shows how all the effects I intend to use come out when done by a true master!

Part One
Part Two
Part Three
Part Four

October 8, 2009

Burning heat

I have begun testing the painting schemes for the army. While the Chaos Sorcerer was just to test the neutral colour choices, this Warrior is to test an exact technique I intend using! I painted him in a really dark bronze colour. I didn't want to go for black due to the fact I don't like black on a model. It is too negative and draws the eye away from details. I built up the flames with Vajello paints as I find them easier to use for this than the GW ones. A hot orange base it built up around where the final lines will be placed. A wash of black tones this down and helps the blends. It also brings the armour to an even darker bronze colour. Once this has dried I can then build up the colours through hot orange to white. This gives the fantastic lava look. The large flat plates on the warriors are really suited to this. This guy is a real WIP. I am testing the colour combinations and blends so please forgive all the other areas! I will eventually figure them out and apply to the warriors. To contrast the armour strongly I will hopefully be doing the cloak quite light. The fur around the collars will be a very light brown, something I intend for the whole fur component of the army. The cloak itself will then be also a light brown but blended up from GW snakebite leather towards GW bleached bone.

As I intend using the bronze as a base for most of the metal in the army I have premixed it! As GW brazen brass is sadly no longer available I had to improvise a little. I had a tiny amount in the bottom of a pot left. Into this I added the Vajello brassy brass. I added black ink to darken and thin the paint a little. Finally a little glaze medium was added to thin the paint further. I will have to leave this overnight to mix a bit more and settle. While I stirred it quite well I find it needs to sit a little longer to mix better. I can check tomorrow and hopefully it will have mixed well. It might not be dark enough so I might have to add some futher ink. I am not sure if I will start straight away on the Warriors then. I would prefer to do something simple like the hounds and get them out of the way so I can do some more interesting stuff. I have been looking online for a tutorial about painting fur. I believe it was on the Brush Thralls site but I can't find it. It was, I believe, a walkthrough of how the Privateer Press studio painted the fur on their Buffalo mounted Trollkin! Anyway it is bound to turn up somewhere. This is the technique I wanted to go for on the hounds as it gave a very natural colour to the furs that I liked a lot. Failing finding that I will look up some reference pictures of wolf fur to give me an idea of what I am going for.

I am continually making it difficult to have a Slaanesh themed army! While I want one still I will really have to work out how I can get all my imagery together! Maybe some burning runes of Slaanesh on the armour? I at least have the symbol on the helmets for the regiment so maybe I can have it painted black emerging from the hot surroundings. I will have to see exactly where it is located in relation to the eye slit to see if that would work. I have come up with the idea of Ash'senal, the Mother Bear and patron godess of the tribe. As an aspect of Slaanesh she protects and suckles her children. In battle her fiery rage is unleased upon their foes.

About Me

Friends