April 27, 2011

The Avatar sucks

This is the worst model I have had to deal with for a long long time. I have been modelling for many the year and this was probably the biggest failure ever. I am not completely sure if it is my fault or the models. I want to blame the model. I had cleaned the model up easily as the mould lines were not so bad. I noticed the bad connection on the legs and the hips. I decided to pin that together to make it stronger. With that done I proceeded and within ten minutes I had the model glued together. Then I noticed the armoured skirt. I hadn't glued it to the model at all. Well I then tried to glue it in place. It didn't fit of course. Despite the best I could manage the piece would not go in. After many many curses I had to break the model apart. Well I only had to break the legs apart... So once I got the legs apart I carefully laid down the body and arms. Of course the arms then decided to break off too. Then the sword... more cursing ensued. Once I had all the pins extracted and cleaned I glued the model back together with the armoured skirt this time.

So sitting back to look at my work I noticed it looked terrible. I had glued the body on at an angle so that the Avatar leande back. It was the only way to get the legs on behind the skirt. So once again I broke the legs apart, managing to keep the arms on this time. Pins were once again extracted and cleaned. I dry fitted the pieces to check and well they don't fit together. I don't know if it is a complete brain failure on my part but it just doesn't go together. I had to put the legs into the joints at an angle so that the skirt could go between the legs and so the body could be at the correct angle.

So now the Avatar is glued together. I am not at all confident that the model will stay together despite the pins. Having pulled it apart far too much the joint has to be weaker. Normally Privateer Press models stay together quite well, far better than I would have expected for their weight. I will begin painting it soon, I guess the rough handling during that process will show if it can stand up to some punishment.

3 comments:

  1. Its a pretty poorly made model I had to repin both arms as they fell off and the sword.

    Check out this guys blog
    http://brokenzealot.blogspot.com/2010/01/avatar-of-menoth.html

    He did an absolutely amazing modification on his Avatar by repinning everything

    ReplyDelete
  2. Yeah I noticed this after my frustrations! I wish I had seen it before...

    ReplyDelete
  3. This model was as bad as the carnivean for me...I gave up in the end :)

    ReplyDelete

About Me

Friends